Page Information

    Page: Can I control my wet Underfloor Heating?
    Page: Cannot logon after Genius Hub app update
    Page: Cannot logon to the Genius Hub
    Page: Can the Genius Hub control Heat Pumps?
    Page: Can the system be used in mainland Europe?
    Page: Can two people use the app?
    Page: Commercial Documents
    Page: Connecting the Genius Hub to the Internet through a power line adapter
    Page: Controlling an open plan area
    Page: Controlling a Plinth Heater
    Page: Controlling Electric Underfloor Heating (or Wet Underfloor with a sensitive floor covering)
    Page: Controlling lights to mimic occupancy using Genius Room Sensors and Smart Plugs
    Page: Controlling lights with Genius Room Sensors and Genius Smart Plugs
    Page: Controlling radiators without Genius Radiator Valves
    Page: Controlling the Dual Channel Receiver with the Genius Hub powered off
    Page: Controlling the heating and hot water manually
    Page: Controlling the Single Channel Receiver with the Genius Hub powered off
    Page: Controlling the system with no internet
    Page: Controlling towel rails/radiators
    Page: Device communication time
    Page: Differences between the Wireless Radiator Valves
    Page: Differences between the Genius Smart Plug
    Page: Dual Band Smart Plug (PLG-E): Why are there two nodes on my system?
    Page: Factory resetting a Genius Radiator Valve
    Page: Factory resetting a Genius Radiator Valve (DA-WRV-E)
    Page: Factory resetting a Genius Room Sensor
    Page: Factory resetting a Genius Smart Plug
    Page: Factory resetting an Electric Relay
    Page: Factory resetting an Electric Switch
    Page: Factory resetting a Powered Room Thermostat
    Page: Factory resetting the Genius Room Thermostat
    Page: Factory resetting the Genius Room Thermostat (HI-WRT-D)
    Page: Factory resetting the Wireless Room Thermostat
    Page: FAQs of battery-powered devices
    Page: FAQs of Footprint Mode
    Page: Genius Radiator Valve controlling the temperature with a Genius Room Sensor
    Page: Genius Radiator Valve error codes
    Page: Genius Radiator Valve is making a noise when heating
    Page: Genius Radiator Valve not controlling a radiator properly
    Page: Genius Radiator Valve responding slowly to change in temperature on the app
    Page: Genius Radiator Valves, Room Thermostats and Room Sensors all in the same zone
    Page: Genius Radiator Valve taking a long time to warm up - outflow side of the plumbing
    Page: Genius Radiator Valve turns radiator off when a window is opened
    Page: Genius Smart Plug switched on unexpectedly
    Page: Get a blank screen when loading the app
    Page: Hard Wired Actuators for Thermostatic Radiator Valve Bodies (TRV bodies)
    Page: Hot Water control using a Genius Radiator Valve stops working
    Page: How can you test if the Dual Channel Receiver is faulty?
    Page: How to test the signal strength?
    Page: How secure is the system?
    Page: How Temperature Hierarchy works
    Page: How the Genius Radiator Valve controls the temperature accurately
    Page: How to manually control the Dual Channel Receiver when it is disconnected from the Genius Hub
    Page: How to manually control the Single Channel Receiver when it is disconnected from the Genius Hub
    Page: How to - Remove and refit the Genius Radiator Valve
    Page: How to - Reset or change the username / forgot the password
    Page: Hub time is wrong
    Page: If This Then That (IFTTT)
    Page: JK Floorheating - Underfloor heating not coming on when Electric Switch shows a solid red light
    Page: Lockable Manual TRV
    Page: Locking the controls of the Genius Room Thermostat
    Page: Logon to the Genius Hub using the local IP address
    Page: Managing your Support Tickets
    Page: Multiple devices not communicating
    Page: No temperature displayed for Hot Water zone
    Page: Port Forwarding
    Page: System Communication and Positioning Guidelines
    Page: Powered Room Thermostat error codes
    Page: Remove old & redundant devices off the Genius Hub
    Page: Restarting the Genius Hub
    Page: Rooms feel like different temperatures
    Page: Scheduling Genius Smart Plugs
    Page: Sockets Compatible with the Plug Locking Cover
    Page: Technical Documents
    Page: Temperature close to the target temperature but the boiler does not come on or the boiler stays on
    Page: The Beta app has expired
    Page: The charts are slow to load
    Page: The difference between remote, zoned and smart control
    Page: The Genius Radiator Valves - General Operation
    Page: The Single or Dual Channel Receiver (boiler controller) has stopped communicating
    Page: The two Genius Valves Adaptors
    Page: Tips for using the Powered Room Thermostat
    Page: Transferring Devices over to a new Genius Hub
    Page: Turning The Genius Hub Off In The Summer
    Page: Updating your Genius Hub
    Page: Uses of the Genius Room Thermostat
    Page: Using If This Then That (IFTTT)
    Page: Using other heating controls with Genius Hub
    Page: Using other Z-Wave and Zigbee equipment on the Genius Hub system
    Page: Valve Exercise Routine - Reset time of operation
    Page: Videos on installing the Genius Radiator Valve
    Page: What are Electric Relays?
    Page: What are In Wall Range Extenders?
    Page: What do I need to add for my JK floorheating system?
    Page: What do the Device Channels mean?
    Page: What to do if a zone is not reaching temperature
    Page: What to do if moving house
    Page: What to do with the Genius Radiator Valve when carrying out maintenance, plumbing or decorating
    Page: When to apply an offset
    Page: Why do I have to enter the username and password each time I use the app?
    Page: Why is my Hot Water not getting up to the temperature?
    Page: Serial Number on Zigbee Devices

View Page History