Factory resetting a Genius Radiator Valve

Owned by Elena Crivoi (Unlicensed)
Last updated: May 18, 2020 by Matthew Hart
2 min read

When to factory reset a Genius Radiator Valve

You may need to reset a Genius Radiator Valve if you are swapping which Genius Hub the Genius Radiator Valve is included onto, or if the Genius Radiator Valve will not re-include onto the system.

How to factory reset the Genius Radiator Valve

To factory reset a Genius Radiator Valve:

  • Remove the battery cover and one battery.

  • Press and hold down the middle ('o') button.

  • Re-insert the battery whilst still holding the middle button.

  • The valve will perform a screen test and show all the icons.

  • Keep the button pressed until the screen goes blank.

  • Release the middle button. 
  • If successful the valve will go into mount mode and 'M' will flash on the screen.

How to add the Genius Radiator Valve to a Genius Hub

The Genius Radiator Valve is now in a factory reset to default state, to add it back onto the system again go to the 'Doctor' on the app which is under the 'Main Menu'.

For more information see /wiki/spaces/HGRD/pages/2136413.

Related Information: