Factory resetting the Wireless Room Thermostat

Owned by Elena Crivoi (Unlicensed)
Last updated: Jul 11, 2018 by Matthew Hart
1 min read

When to factory reset a Wireless Room Thermostat

You may need to reset a Wireless Room Thermostat if you are swapping which Genius Hub the Wireless Room Thermostat is included onto or if it has stopped communicating with the Genius Hub and re-including it does not work.

How to factory reset the Wireless Room Thermostat

To factory reset a Wireless Room Thermostat:

  • Remove the Wireless Room Thermostat from the wall by loosening the 2 screws on the underside of the Wireless Room Thermostat. This requires a flat balded screwdriver.

  • On the back of the Wireless Room Thermostat behind the wall mounting plate, there is a row of 8 white DIP switches.

    • Put switch 1 (the left most switch), to the UP (on) position.

  • Turn over the Wireless Room Thermostat and rotate the dial on the front of the Wireless Room Thermostat, until 'P' is displayed on the LCD screen.

  • Press the dial twice in succession.

  • The LCD screen will read 'PP'.

How to add the Wireless Room Thermostat to a Genius Hub

The Wireless Room Thermostat is now in a factory reset to default state, to add it back onto the system again go to the 'Doctor' on the app which is under the 'Main Menu'.

For more information see /wiki/spaces/HGRD/pages/2136409.

Related Information: