This article is an excerpt from the Genius Hub Doctor, which is built into the App.

These instructions are provided so that the step-by-step information is available to users, but please note that these actions should generally be carried out whilst using the Doctor.

To access the Doctor, click here

Solution ID: 7454

Step 1

Factory resetting a device removes it from any Genius Hub and removes any custom settings. It does not require a Genius Hub to power powered on/in communications range.

Ensure that the Genius Radiator Valve has working batteries installed.

Step 2

First, remove the battery cover and one battery.

Step 3

Press and hold down the middle ('o') button.

Re-insert the battery whilst still holding the middle button.

The valve will perform a screen test and show all the icons.

Keep the button pressed until the screen goes blank.

Release the middle button.

If successful the valve will go into mount mode and 'M' will flash on the screen.

Click here to add the Genius Radiator Valve to this Genius Hub

Browser not supported