Electric Relay Factory Reset
- Simon Turner
This article is an excerpt from the Genius Hub Doctor, which is built into the App.
These instructions are provided so that the step-by-step information is available to users, but please note that these actions should generally be carried out whilst using the Doctor.
To access the Doctor, click here
Solution ID: 7354
Step 1
Factory resetting a device removes it from any Genius Hub and removes any custom settings. It does not require a Genius Hub to power powered on/in communications range.
Ensure that the Electric Relay is wired in and powered on.
The Electric Relay will have to be removed from its pattress to check the connection.
Unscrew the Fused Spur or Blanking Plate from the front of the pattress.
Step 2
Press the button on the front 4 times in 1.5 seconds, and hold it on the 4th press until the light turns on and then turns off.
When the light turns off to remove your finger from the button.
If the light flashes slowly, the device has been successfully factory reset.
Click here to add the Electric Relay to this Genius Hub