Electric Relay Reconfigure
- Simon Turner
This article is an excerpt from the Genius Hub Doctor, which is built into the App.
These instructions are provided so that the step-by-step information is available to users, but please note that these actions should generally be carried out whilst using the Doctor.
To access the Doctor, click here
Solution ID: 7357
Step 1
Sometimes an Electric Relay may lose the factory settings which were applied to it when it was added to the system. This can occur when there has been a power cut to the device. When the Electric Relay has the incorrect configuration messages it can struggle to communicate frequently to the Genius Hub which leads to the device being slow to respond or not controlling the heating correctly.
Step 2
First locate the Electric Relay in the room you want to adjust.
The Doctor will ask you to select the relevant device
Step 3
The device now needs to be configured by the Genius Hub to ensure the correct behaviour and communication.
The Doctor will communicate with the device
Step 4
To ensure that the messages get through to the device.
The Doctor will communicate with the device
Step 5
The Electric Relay should now receive the correct configuration parameters.
The Doctor will check that the device is configured correctly