Smart Plug (C / D) Include

Owned by Simon Turner
Sept 16, 2024
2 min read

This article is an excerpt from the Genius Hub Doctor, which is built into the App.

These instructions are provided so that the step-by-step information is available to users, but please note that these actions should generally be carried out whilst using the Doctor.

To access the Doctor, click here

Solution ID: 7200

Step 1

Plug the Smart Plug into the wall socket within 2 meters (line of sight) of the Genius Hub (and turn the socket on).

The light will flash once every second.


Step 2

Now the Genius Hub needs to get ready to add the device.

The Doctor will search for the new device



Step 3

Press the clear/ red button 3 times in within 1.5 seconds.

The flashing red light stops flashing when the device has included successfully. If the red light continues to flash, unplug and re-plug in the device.


On success, the Smart Plug has been assigned a number, write this number on the side of the device.


The Doctor will communicate with the device


Step 4

Now you need to finish the steps here and then add the Smart Plug to a corresponding zone on the app if you want to control when it turns on, so you can control other things such as lights.

If the Smart Plug is plugged in and powered on at the wall, then it will always boost the signal.

The light on the front indicates the status of the switch inside the Smart Plug. If the light on the front is on then whatever you plug into the Smart Plug will turn on, if the light is off then what you plug into the Smart Plug will turn off, the light does not affect the boosting of the signal.

The Doctor will ask you to select a zone


Step 5

The Doctor will create the new zone



Step 6

The Doctor will now assign the device to a zone



Step 7

Locate the Smart Plug as necessary.

See the following article for further advice: https://www.geniushub.co.uk/signal-boosting