Single Channel Receiver Unassign Duplicate

Owned by Simon Turner
Sept 16, 2024
1 min read

This article is an excerpt from the Genius Hub Doctor, which is built into the App.

These instructions are provided so that the step-by-step information is available to users, but please note that these actions should generally be carried out whilst using the Doctor.

To access the Doctor, click here

Solution ID: 7010

Step 1

The Single Channel Receiver has been assigned to 2 or more zones. This will stop the Single Channel Receiver working properly and may mean rooms heat unexpectedly or do not heat up at all.


Step 2

Select the Single Channel Receiver which has been assigned incorrectly.

The Doctor will ask you to select the relevant device


Step 3

The Single Channel Receiver channel is assigned to the following rooms. Please select the one room you wish to control with this channel.

The Doctor will ask you to select a zone


Step 4

The Genius Hub will now unassign the Single Channel Receiver channel from all zones.

The Doctor will remove the device from the zone


Step 5

The Genius Hub will now assign the Single Channel Receiver Channel to the correct zone.

The Doctor will now assign the device to a zone