The PRT will need 48 hours for the PRT to auto-learn the room. If you have changed any manual settings on the PRT within this time it would be wise to factory reset the device and add it back onto your Genius Hub.
How to improve temperature measurement with ventilation systems
If you have it installed so that it is flush mounted, there is often a positive pressure in airtight apartments or modern buildings and this can cause the PRT to have air passing through it which is not representative of the air in the room. This air passing past the sensor can disrupt the algorithm in the thermostat which is used to calculate the air temperature in the room
Fix this by surface mounting the PRT or factory resetting the PRT (see below) to re-start the learning algorithm
Problems with the temperature being read as too high when not heating
The LED screen if left on for long periods of time can generate heat and this can affect the temperature that the PRT experiences
Reduce the brightness of the LEDs using this article.
To Factory Reset the PRT
- See this article.