When to factory reset a Genius Room Thermostat
You may need to reset a Genius Room Thermostat if you are swapping which Genius Hub the Genius Room Thermostat is included onto.
How to factory reset the Genius Room Thermostat
To factory reset a Genius Room Thermostat:
Remove the Genius Room Thermostat from the wall by sliding it up against the back plate.
Remove one of the batteries.
- When looking at the beck, press and hold the top right (LED) button while reinserting the battery until the LED flashes red or comes on continuously (approx. 5 seconds).
- If you have successfully factory reset the thermostat, then when you press and release the top right LED button it will flash green quickly.
How to add the Genius Room Thermostat to a Genius Hub
The Genius Room Thermostat is now in a factory reset to default state, to add it back onto the system again go to the 'Doctor' on the app which is under the 'Main Menu'.
For more information see this article.