Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

This article is an excerpt from the Genius Hub Doctor, which is built into the App.

These instructions are provided so that the step-by-step information is available to users, but please note that these actions should generally be carried out whilst using the Doctor.

To access the Doctor, click here

Solution ID: 7413

Step 1

The Powered Room Thermostat displays an Er5 error on the screen when there is nothing correctly wired into the terminals for the External Sensor. Whilst this error is on screen, the Powered Room Thermostat will not correctly control the heating.

This setting is not currently enabled for the Powered Room Thermostat and so is likely caused by either a user trying to change settings from the front of the device, or if it is misconfigured.

For information on installing the Powered Room Thermostat and to check a probe has not been installed, see:

  • No labels