| Info |
|---|
| The PRT Powered Room Thermostat will need 48 hours for the PRT Powered Room Thermostat to auto-learn the room. If you have changed any manual settings on the PRT Powered Room Thermostat within this time it would be wise to factory reset the device and add it back onto your Genius Hub. |
...
If you have it installed so that it is flush mounted, there is often a negative pressure in some rooms and positive pressure in other rooms, especially in airtight apartments or modern buildings, and this can cause the PRT Powered Room Thermostat to have air passing through it which is not representative of the air in the room. This air passing past the sensor can disrupt the algorithm in the thermostat which is used to calculate the air temperature in the room
Fix this by surface mounting the PRT Powered Room Thermostat or factory resetting the PRT Powered Room Thermostat (see below) to re-start the learning algorithm
...
The LED screen if left on for long periods of time can generate heat and this can affect the temperature that the PRT Powered Room Thermostat experiences
Reduce the brightness of the LEDs using this articleor turn off the LEDs using /wiki/spaces/ICS/pages/3047972.
To Factory Reset the
...
Powered Room Thermostat
- See this article.