Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 14 Next »

If you do not put the smart plug into a 'room' on the app it is therefore 'unassigned', and the app will have no control over the time that the outlet on the smart plug is on or off. If you turn it on manually using the button on the front of it, you must also remember that when the hub restarts (which is once a week on a Monday) or there is a power cut, then the smart plug defaults to the off state, so be careful not to plug anything into it which needs to be on all of the time such as fridges or freezers.

To control the timing of the outlet of the smart plug from the app, you first need to add a room to the app to control the smart plug.

Create a room on the app for the Smart Plug

  • Click on the Menu icon in the top-right corner of the app, and select 'Setup'
  • Click on 'Create New Room'
  • Enter the Name of the room (e.g. Office Fan)
  • Select the room type 'ON / OFF'
  • Click 'Ok'

 

Add the Smart plug to the room:

  • Still on the setup page, click on the room to put the smart plug in
  • Click on 'Add A Device'
  • Select the Smart plug you wish to control from the list
    • To identify the smart plug you wish to control, look for the hand written numbered sticker, normally found on the side or back of the device
  • Click 'Ok'

 

To control the smart plug follow this link:

Chapter 08) App - Using Timer to control devices connected to smart plugs

Unable to render {include} The included page could not be found.

 

 

Filter by label

There are no items with the selected labels at this time.

  • No labels