If a Genius Radiator Valve needs to be removed from a radiator it cannot be just unscrewed it needs to be put into 'Mount Mode' first.
These steps are very important to follow; so that you do not damage the valve when you are taking it off or putting it onto a radiator.
Video guide:
Step-by-step guide:
To remove the Genius Radiator Valve
- Press and hold the middle /°\ button on the valve until a 'M' appears on the screen.
- Press the middle button once more, and the valve will 'buzz'.
- After 10 seconds the 'M' will flash and the valve will feel loose.
- Apply firm pressure to the top of the valve and rotate it like a screw anti-clockwise until the valve is removed off the radiator.
- The thread is like a medicine bottle and you need to apply pressure to the top of the valve to engage the thread inside the valve to be able to remove it.
- M30 adaptor: The adaptor is most likely to remain with the Genius Radiator Valve, but if it remains on the radiator this is not a problem.
- RA adaptor: The adaptor should remain on the radiator, but can easily be removed using a hex key.
To remove the Genius Radiator Valve
- Screw the Genius Radiator Valve back onto the radiator valve body clockwise.
- Press and hold the middle /°\ button on the valve until the 'M' stops flashing the the valve will 'buzz'.
- The valve is successfully mounted back on the radiator when the screen shows the target temperature when you press the middle button, and it is stiff if you try to rotate the valve.