...
Step 1
Make sure that the Genius Radiator Valve is within 2 meters (line of sight) of the Genius Hub.
If the devices are not close enough together:1. Unmount the Genius Radiator Valve from the radiator.
This video shows how to remove and refit the Genius Radiator Valve .
2. Move the Genius Hub closer to the Genius Radiator Valve. The Genius Hub must have power and an Internet connection. This can be done by:
a) Using a long Ethernet cable
b) Plugging the Hub into a different Ethernet switch
c) Using a Power Line Ethernet adaptor or WiFi booster which has an Ethernet port ( see this link for how to connect the hub with a power-line Ethernet adaptor )
...
On success, the Genius Radiator Valve has been assigned a number, write this number on the side of the device.
If you have excluded or factory reset the device previously, it will re-add with a new, different number. If it has the same number as before the reset, the device was not successfully excluded/factory reset.
The Doctor will communicate with the device
...
If not already, re-install the Genius Radiator Valve onto the radiator.
...
Step 5
Now pick a zone to assign the Genius Radiator Valve to.
...