Content Comparison

To remove the Genius Radiator Valve

• Press and hold the front button on the valve until a 'M' appears on the screen.

Image Added

• Press the middle button once more, and the valve will 'buzz'.
  • After 10 seconds the 'M' will flash and the valve will feel loose.
• Rotate the Device until you can see the back of the device and firmly push down the button whilst pulling up on the battery cover. This will remove the battery cover from the device
  Image Added
  • Now that the shell has been removed, press & hold the same button the battery cover was in front of whilst turning the device anti-clockwise.
  • M30 adaptor: The adaptor is most likely to remain with the Genius Radiator Valve, but if it remains on the radiator this is not a problem.
  • RA adaptor: The adaptor should remain on the radiator, but can easily be removed using a hex key.

To refit the Genius Radiator Valve

• Screw the Genius Radiator Valve back onto the radiator valve body clockwise.
  
  Image Added
• Press and hold the front button on the valve until the 'M' stops flashing the the valve will 'buzz'.
• The valve is successfully mounted back on the radiator when the screen shows the target temperature when you press the middle button, and it is stiff if you try to rotate the valve.
• If the battery cover is not installed, either line up the buttons at the back of the device, or the screen and clear screen cover, and gently push the battery cover down until it clicks.
  Image Added
  
• If the Genius Radiator Valve screen is facing the wrong way, rotate the device clockwise until the screen faces the front. The device will click as it rotates, but this will not loosen the device from the radiator.

Video guide:

Step-by-step guide:

To remove the Genius Radiator Valve

• Press and hold the middle /°\ button on the valve until a 'M' appears on the screen.

Image Modified

• Press the middle button once more, and the valve will 'buzz'.
  • After 10 seconds the 'M' will flash and the valve will feel loose.
• Apply firm pressure to the top of the valve and rotate it like a screw anti-clockwise until the valve is removed off the radiator.
  • The thread is like a medicine bottle and you need to apply pressure to the top of the valve to engage the thread inside the valve to be able to remove it.
  • M30 adaptor: The adaptor is most likely to remain with the Genius Radiator Valve, but if it remains on the radiator this is not a problem.
    

    Widget Connector
    width 750 url https://www.youtube.com/watch?v=Tz9vKUb__nM height 450

  • RA adaptor: The adaptor should remain on the radiator, but can easily be removed using a hex key.
    

    Widget Connector
    width 750 url https://www.youtube.com/watch?v=uP7GRH2rUqs height 450

    • 
      Image Modified