Page Comparison

When to factory reset a

Powered Room Thermostat

You may need to reset a Genius Smart Plug Powered Room Thermostat if you are swapping which Genius Hub the Smart Plug device is included onto.

, or if you are trying to clear some of the error codes.

Image Added

How to factory reset

the Powered Room Thermostat

To factory reset a Genius Smart PlugPowered Room Thermostat:

• Ensure that the Genius Smart Plug is plugged in and the Powered Room Thermostat is powered on.

Image Removed

• Press the button on the front 4 times in 1.5 seconds, and hold it on the 4th press until the light turns on and then turns off.

Image Removed

• When the light turns off to remove your finger from the button.

Image Removed

• If you have successfully factory reset the Genius Smart Plug, then when you unplug the Genius Smart Plug and plug it back in again, then the front button will slowly flash showing that it is not connected to any networkOn the front of the device, press the right and centre buttons down for 20 seconds.
• During the 20 seconds rES will be displayed on the screen.

• When rES is no longer displayed, the device is factory reset.

How to add the

Powered Room Thermostat to a Genius Hub

The Genius Smart Plug Powered Room Thermostat is now in a factory reset to a default state, to add it back onto the system again go to the 'Doctor' on the app which is under the 'Main Menu'.

For more information see this article.