Page Comparison

If you see a code on the valve that is not a temperature then there may be a problem.

The error codes are as follows:

• E1 - Front temperature sensor has a problem
• E2 - Back temperature sensor has a problem
• E3 - Motor has a problem

• E5 - communication error

In every case restart the valve by removing the batteries and putting them back in after 30 Seconds. The valve screen should display 21 and the E message should not return unless the valve definitely has a problem.

If the E5 error persists see the article: How to - Genius Position the Smart Plugs.

For error codes E1, E2 & E3 persist please contact Genius if the valve is under warranty for a replacement.