 Image Added
If you do not put the a smart plug into a 'roomzone' on the app it is considered to be 'unassigned', and the app will have no control over the time that the outlet on the smart plug is on or off. You can now use the plug 'manually' - switch by switching the plug on or off by pressing the button on the front of it. The colour of the button will be red if the plug is on, and clear if it is off. Please note that if you turn the plug on manually, you must remember that when if the hub restarts (which is once a week on a Monday) , which it will do if the software is upgraded on it, or if there is a power cut, then the smart plug defaults may default to the off state. Therefore, please be careful not to plug anything into it which needs to be on all of the time such as a fridge or freezer. In order to control the timing of the outlet of the smart plug from the app, you first need to add a room zone to the app to control the smart plug. | Panel |
|---|
| Create a room zone on the app for the Smart Plug: - Click Tap on the Menu Submenu (•••) icon in the top-right corner of the app, and select 'Setup'Click .
- Tap on 'Create New RoomZone'.
- Enter the Name name of the room zone (e.g. Office Fan).
- Select the room zone control type 'ON / OFF'.
- Click 'OkCreate'
Add the Smart plug Plug to the roomzone: - Still on the setup page, click on the room to put the smart plug in
- Click on 'Add A Device'Select the new zone that you have created.
- Tap on the Submenu (•••) icon in the top-right corner of the app.
- Tap on 'Zone Setup'.
- Tap on 'Assign Device' at the bottom.
- Select the Smart plug Plug you wish to control from the list.
- To identify the smart plug Smart Plug you wish to control, look for the hand written numbered sticker, normally found on the side or back of the device
- Click 'OkOK'
To control the smart plug follow this link: Chapter 08) App - Using Timer to control devices connected to smart plugs | Include Page |
|---|
| HM:4.4 - Smart Plug - Warning | HM:4.4 - Smart Plug - Warning | Smart Plug:- Tap on the zone you want to control.
- Set up a schedule for the zone or override the zone.
|