5. Timer Mode

In Timer mode, you can set up a 7-day schedule to control the heating in this zone. You set up a ‘heating period’ to suit your needs, including start time, end time and temperature. At the start of the heating period, the Genius system will activate the heating in the room. Once the room has reached the set temperature, the system will maintain the temperature for the duration set.

The main difference between Timer mode in Radiator, Underfloor or Electric heating zones compared with On/Off zones is that you can set a temperature for these types of zone. In On/Off zones you can only set periods where the heating is on or off.

To view the schedule for any zone:

• From the My House page, click on the zone you wish to view.
• Ensure the zone is in Timer mode.

If you wish to view a day's schedule in more detail, click on the day you wish to view. This will load the details of the heating schedule including the default temperature and a list of the heating periods.

How to set up your schedule

Adding a Timer period

With the Genius system you can set as many heating periods as you require throughout the day. 

To add a timer period for a radiator or TPI zone:

1. From the My House page, click on the zone you wish to view.
2. Change the zone to Timer mode.
3. Click on the first day to have a schedule added.
4. Click the floating add heating period button found at the bottom-right of the page.
   
5. To select the temperate, drag the slider to the correct temperature, then click Set.
    

6. Select when the heating period should begin, by first clicking on the hour the heating period will begin.
    
   Next click on the minutes the heating period should begin, followed by Set.
    

   If you want to change the hours the heating period starts at, click on the hours at the selected time.
   

7. Select when the heating period should finish.
   
8. Click OK. 

Editing a Timer period

If your schedule changes or the temperature in a room is not right for you, it is easy to change a Timer period. 

To change a Timer period for a radiator, TPI or On/Off zone:

1. From the My House page, click on the zone you wish to edit.
2. Ensure the zone is in Timer mode.
3. Click on the day you want to change the schedule of.
4. Click on the Timer period you want to change.
    
5. Click on the relevant option you want to change, e.g. the end time.
    
6. Change the option to its new setting.
7. Click OK.

Removing a Timer period

If your schedule has changed significantly, you may wish to delete a Timer period. 

To remove a Timer period for a radiator, TPI or On/Off zone:

1. From the My House page, click on the zone you wish to edit.
2. Ensure the zone is in Timer mode.
3. Click on the day you want to change the schedule of.
4. Next to the Timer period you no longer want, click on the 'Bin' icon.
   
5. In the confirmation dialog, click 'Delete'.

Default temperature

For those times of day which you do not want the heating on high, you can set a default temperature, so that the room doesn't cool down too far, leaving you to return to a cold house or causing the room to take a long time to heat up again. As standard the system will use the Off setting for the default temperature, so a Radiator room will go into frost protect mode and the other room types will stay off.

The default temperature can be set for each day of each zone. To do this for radiator and TPI zones:

1. From the My House page, click on the zone you wish to edit.
2. Ensure the zone is in Timer mode.
3. Click on the day which you want to change the default temperature.
4. Click on the Default temperature entry at the top of the list of heating periods.
   
5. Change the default temperature and click Set.

There is no configurable Default setting for On/Off zones. The zones are off by default and the Timer periods are always On periods. 

Copy to Another Day

Once you have set up the schedule for one day, it is easy to copy the schedule to another day. This can be very useful if you have a regular schedule, such as if you work regular hours on a number of days in the week. 

To copy the schedule from one day to another:

1. From the My House page, click on the zone you wish to view.
2. Ensure the zone is in Timer mode.
3. Click on the day which you want to copy the schedule from.
4. Click on the copy icon on the top right of the page, underneath the mode selector.
   
5. Select the days to copy the schedule to.
6. Click 'Copy'.

Advanced options

Copy to Another Zone

After setting up the schedule for one zone, you may find it easier to copy the schedule from this zone to another one and adjust it. This is often the case if you have multiple bedrooms in the property for example.

To copy the schedule from one zone to another:

1. From the My House page, click on the zone you wish to copy the schedule from.
2. Ensure the zone is in Timer mode.
3. Click on the zone sub-menu and click 'Copy Schedule'.
   
4. Select the zones you want to copy this rooms schedule to
5. Click 'Copy'.

Delete Schedule

If your schedule has changed significantly, it may be easier to clear all the schedule for all of the zone and start again by adding new Timer periods.

To delete the entire schedule for a zone:

1. From the My House page, click on the zone you wish to delete the schedule of.
2. Ensure the zone is in Timer mode.
3. Click on the zone sub-menu and click 'Delete Schedule'. 
   
4. In the confirmation dialog, click 'Delete'.

Pre-heating

An alternative way to schedule the heating in your home is to activate Pre-heat from the Zone Setup.

• If pre-heating is disabled: The system will start heating the zone at the start of a Timer period, which will often mean the zone is below temperature for the first 30 minutes whilst the room heats up. 
• If pre-heating is enabled: The system will calculate how long it takes for a room to reach the set temperature and start the heating that much earlier than the start of the Timer period. This means that the heating will start up before the beginning of the Timer period but the room will be warm for the entirety of the Timer Period.

If you want to enable Pre-heating, please see the 'Setup pages' chapter.