In Sense mode, you can set up a 7-day schedule to control the heating in this zone, in a similar manner to Timer mode. You set up a ‘heating period’ to suit your needs, including start time, end time, temperature, along with whether you want the period to switch on regardless or only when someone is in the zone.
...
The main difference between Timer mode in Radiator, Underfloor heating or Hot Water Temperature zones compared with On/Off zones is that you can set a temperature for these types of zone. In On/Off zones you can only set periods where the heating is on or off.
| Note |
|---|
The 'react to occupancy' will only work in zones with a Wireless Room Sensor, Wireless Motion Sensor, or Occupancy Trigger channel assigned to them. |
To view the schedule for any zone:
...
- The zone will control to the set temperature of the heating period, irrespective of any occupancy being detected.
Enabling Sense Mode
| Note |
|---|
Sense mode is currently available for free during its BETA phase. |
To use Sense Mode
| Demonstration |
|---|
|
- Log into one of your Genius Hub
- Click on the Main Menu, followed by 'Settings'
- Choose 'Beta Features' and tap the toggle for 'Sense Mode'
- The 'Timer' mode option has now been replaced with 'Sense' mode
...
With the Genius Hub system you can set as many heating periods as you require throughout the day.
| Demonstration |
|---|
|
| Info |
|---|
Each timer period must be a minimum of 5 minutes, however there are no other limits on the number of periods you can create. |
...
If you want to enable Pre-heating, please see the 'Setup pages' chapter.
Advanced options
| Demonstration |
|---|
|
For the following options, see the relevant sections of Timer Mode:
- Copy to Another Day
- Copy to Another Zone
- Delete Schedule
...
| bgColor | #ccc |
|---|---|
| borderStyle | none |
Related Information:
...
- Schedule
...