...
If the electric heating is also being controlled with a Room Sensor or Room Thermostat, any controls on the heater should be set to constant and the highest temperature to ensure that there are no conflicts between the control provided by the Genius Hub system and the built in controls.
If the electric heating is only being controlled by an Electric Switch or Smart Plug (i.e. on/off control, not Genius Temperature temperature control from the app), then disable any timer functions on the heater, but leave any temperature limits settings enabled.
Wired-in Electric Heating
...
Many Electric Heaters are wired into a Fused Switch Spur, for electrical safety. These can be controlled by the Genius Hub system by fitting the Electric Switch between the wiring of Switched Fused Spur and the Electric Heater.
...