...
- Always ensure that the electric heater and wiring for the Electric Switch is electrically isolated before you commence work on any wiring.
- Break out the relevant section of a 1-gang pattress for the wiring and fix the pattress to the wall. It is recommended that a 40mm pattress is used.
- Pull through the relevant wiring, allowing plenty of spare.
- Wire in the Electric Switch as per the wiring diagrams provided, checking this is suitable as per the electric heating installation manual.
- Fit the Electric Switch into the pattress, ensuring there are no trapped wires. Screw in using standard pattress screws, and check the unit is securely and safely attached to the wall.
| Pagebreak |
|---|
In normal operation there will be no lights when the unit is off and one or more red lights near the button when heating.
...