...
- On the Room Thermostat (DA-WRT-C) you can set the temperature of the override from the device. To override a zone from the thermostat:
- Press the up or down button until the desired temperature is reached. The zone will now override to the set temperature for the duration set on the app.
- Press the up or down button until the desired temperature is reached. The zone will now override to the set temperature for the duration set on the app.
- On the Room Thermostat (DA-WRT-B) you can set the temperature of the override from the device. To override a zone from the thermostat:
- Rotate the dial until the desired temperature is reached. The zone will override to the set temperature for the duration set on the app.
- Rotate the dial until the desired temperature is reached. The zone will override to the set temperature for the duration set on the app.
- On a Radiator Valve (DA-WRV-C, DA-WRV-B, or DA-WRV-A) you can set the temperature of the override from the device. To override a zone from the Radiator Valve:
- Press the up or down button until the desired temperature is reached. The zone will override to the set temperature for the duration set on the app.
- Press the up or down button until the desired temperature is reached. The zone will override to the set temperature for the duration set on the app.
- On the Single Channel Receiver (HO-SCR-C) you can trigger an from the device. To override a zone from the receiver unit:
- Press the On (top) button. The system will use the override duration set on the app for this zone, and override to the last used override temperature/setting.
- Press the On (top) button. The system will use the override duration set on the app for this zone, and override to the last used override temperature/setting.
- On the Dual Channel Receiver (HO-DCR-C) you can trigger an from the device. To override a zone from the receiver unit:
- Check the door panel to see which of the white buttons relates to the zone you have chosen to override.
- Press both the correct white button and the green button at the same time. The system will use the override duration set on the app for this zone, and override to the last used override temperature/setting.
- On the Electric Switch (HO-ESW-D) you can trigger an override from the device. To override a zone from the Electric Switch:
- Press the button at the bottom right hand corner of the receiver unit. The system will use the override duration set on the app for this zone, and override to the last used override temperature/setting.
- Press the button at the bottom right hand corner of the receiver unit. The system will use the override duration set on the app for this zone, and override to the last used override temperature/setting.
- On the Smart Plug (PH-PLG-C or PO-PLG-B) you can trigger an from the device. To override a zone from the receiver unit:
- When the plug is off, press the button in the middle of the plug. The system will use the override duration on the app for this zone, and override to the last used override temperature/setting.
- When the plug is off, press the button in the middle of the plug. The system will use the override duration on the app for this zone, and override to the last used override temperature/setting.
| Info |
|---|
In an On/Off zone, you can override the zone, but only by switching it On. The On and Off buttons on the Single and Dual Channel Receivers and the buttons on the Electric Switch and Smart Plugs can be used to override their respective zones on.You only need to adjust one device in the zone. So if you have 2 Radiator Valves in the same room the system will take the override from one device and relay this new information to all of the devices in the room. |
My House Override
If you have a device in the My House, such as a Thermostat reporting the temperature to My House this can be used to affect all of your Radiator and Underfloor rooms with one manual override.
- For a Thermostat you can adjust the temperature (as detailed above) and all of your Radiator and Underfloor zones (in Timer, Footprint or Override modes) will override to the selected temperature on the device and to the duration set in My House.
...
- Rooms in Off mode will not be overridden when using the My House Override so rooms rarely used (such as spare bedrooms) are not heated each time the My House Thermostat is interacted with.