...
If you started your Heat Genius system with a Genius Starter Kit and want to begin adding Genius Radiator Valves to your system, you will need to follow the instructions below before adding the first valve to your system:
...
Prepare your 'Genius Starter Kit + Hot Water' for zoning
Adding the 'Hot Water Time and Temperature addon' to your system
If you started your Heat Genius system with a Genius Starter Kit+ Hot Water and want to begin adding Genius Radiator Valves to your system, you will need to follow the instructions below before adding the first valve to your system:
- Go to your single 'Heating' zone.
- Click on the sub-menu, followed by 'Zone Setup'.
- Under the list of devices, make a note of the channel of the Dual Channel Receiver which is assigned to this zone.
- Now remove all of the devices from this zone.
Click on 'Delete this zone' to remove this zone from your system
Info If you are adding Radiator Valves to only some of your radiators, then you may want to follow these instructions to create a schedule for the uncontrolled radiators.
- Click on the Home icon to return to the My House page.
- Click on the My House sub-menu, followed by 'My House Setup'.
- In the Quick Actions bar, click on 'Assign device'.
- Select the 'Dual Channel Receiver' channel which was previously assigned to 'Heating' and 'Room Thermostat', followed by 'Assign'.
Create new zone
If you need to create a new zone to add the device to:
...