Page Comparison

...

Once the device is added, you will need to assign it to a zone:

1. Click on the zone you ant want to add the device to.
2. Click on the Zone sub-menu and Zone Setup.
3. Click on 'Assign device'.
    
4. Find the number of the device you want to assign to the room (this will have been shown on screen during the inclusion process, or on a sticker if purchased as part of your original system).

5. Select the correct device and click 'Assign'.

Anchor
AssignChannel AssignChannel

Assign a channel

It is sometimes useful to add a single channel to a zone, rather than the whole device. A channel is a single part of the device, such as the measured temperature. To assign a channel:

1. Click on the zone you want to add the channel to.
2. Click on the Zone sub-menu and Zone Setup.
3. Click on 'Assign device'.
   Image Added 
4. Click on 'Show details' above the list of devices.
    Image Added
5. Find the number of the device you want to assign the channel from (this will have been shown on screen during the inclusion process, or on a sticker if purchased as part of your original system).

6. Select the channel of the device and click 'Assign'.