Page Comparison

...

To override a single zone from the app:

Image Added

1. From the My House page, click on the zone you wish to Override.
2. Change the mode to Override.
3. Select the temperature you want to Override the zone to. This can be up or down, and so can be used to bring the heating on at a different time of day or to turn it off earlier than usual.
4. Select the duration of the Override. 
5. The Override will start immediately.For an On/Off type of zone, you can only select the duration of the override.

To check how long is left of the override:

Image Added

1. From the My House page, click on the zone you have Overridden.
2. The Override duration will have counted down since the Override began and will display the time remaining. 

...

If you want to stop the Override before it has reached its set end point:

Image Added

1. From the My House page, click on the zone you wish to cancel the Override of.
2. In the Quick Actions bar at the bottom of the page, click on 'Stop Override'.
3. Click 'Stop'. 

...

• On the Room Thermostat (DA-WRT-C) you can set the temperature of the override from the device. To override a zone from the thermostat:
  • Press the up or down button until the desired temperature is reached. The zone will now override to the set temperature for the duration set on the app.
    Image Added 
• On the Room Thermostat (DA-WRT-B) you can set the temperature of the override from the device. To override a zone from the thermostat:
  1. Rotate the dial until the desired temperature is reached. The zone will override to the set temperature for the duration set on the app.
     Image Added 
• On a Radiator Valve (DA-WRV-C, DA-WRV-B, or DA-WRV-A) you can set the temperature of the override from the device. To override a zone from the Radiator Valve:
  1. Press the up or down button until the desired temperature is reached. The zone will override to the set temperature for the duration set on the app.
     Image Added 
• On the Single Channel Receiver (HO-SCR-C) you can trigger an from the device. To override a zone from the receiver unit:
  1. Press the On (top) button. The system will use the override duration set on the app for this zone, and override to the last used override temperature/setting.
     Image Added 
• On the Dual Channel Receiver (HO-DCR-C) you can trigger an from the device. To override a zone from the receiver unit:
  1. Check the door panel to see which of the white buttons relates to the zone you have chosen to override.
  2. Press both the correct white button and the green button at the same time. The system will use the override duration set on the app for this zone, and override to the last used override temperature/setting.
     Image Added 
• On the Electric Switch (HO-ESW-D) you can trigger an override from the device. To override a zone from the Electric Switch:
  1. Press the button at the bottom right hand corner of the receiver unit. The system will use the override duration set on the app for this zone, and override to the last used override temperature/setting.
     Image Added 
• On the Smart Plug (PH-PLG-C or PO-PLG-B) you can trigger an from the device. To override a zone from the receiver unit:
  1. When the plug is off, press the button in the middle of the plug. The system will use the override duration on the app for this zone, and override to the last used override temperature/setting.
     Image Added 

...

• For a Single or Dual Channel Receiver you can press the respective on button (as detailed above) and all of your Radiator and Underfloor rooms will override to the temperature and duration set in My House.
• For a Thermostat you can adjust the temperature (as detailed above) and all of your Radiator and Underfloor rooms will override to the selected temperature on the device and to the duration set in My House.

...