Page Comparison

...

1. From the My House page, click on the zone you wish to Override.
2. Change the mode to Override.
3. Select the temperature you want to Override the zone to. This can be up or down, and so can be used to bring the heating on at a different time of day or to turn it off earlier than usual.
4. Select the duration of the Override. 
5. The Override will start immediately.
   <image of override active, with temp and time set>For an On/Off type of zone, you can only select the duration of the override.

To check how long is left of the override:

1. From the My House page, click on the zone you have Overridden.
2. The Override duration will have counted down since the Override began and will display the time remaining. <image of duration remaining highlighted> 

Edit an Override

If the Override you have setup no longer suits your needs, you can edit the time and temperature of the Override by:

...

1. From the My House page, click on the zone you wish to cancel the Override of.
2. In the Quick Actions bar at the bottom of the page, click on 'Stop Override'.
3. Click 'Stop'.
   <image of quick actions bar highlighted>  

The zone will revert to the mode and schedule active before the Override was placed.

...