...
| Info |
|---|
The Genius Hub is always learning the Footprint schedule in the background so it will be ready when you come to change it. |
Setting up Footprint mode
Footprint Options
There are five options unique to footprint mode, which should be configured before you use Footprint mode.
...
- Starts from: This is the time which the zone will stop responding to occupancy and is normally set for roughly the same time the when the last people go to bed. The default setting for the Starts from time is: 23:00
- Ends at: This is the time when the zone starts reacting to occupancy again and is normally set for when the people get up in the morning. The default setting for the Starts from time is: 06:00
Zone Setup
Other settings you may need to adjust prior to using Footprint mode are in the Zone Setup page. This can be accessed by:
...
| Info |
|---|
We recommend that Pre-heat be enabled if you are going to use Footprint mode as otherwise the room will only start to heat at the beginning of each predicted heating period, rather than the room be warm ready for when you normally use the room. |
Quick Actions
In Footprint mode there are three new settings to select between based on how you want Footprint mode to work in this zone. They are:
...