Wireless Motion Sensor Unassign Duplicate

Owned by Simon Turner
Sept 16, 2024

This article is an excerpt from the Genius Hub Doctor, which is built into the App.

These instructions are provided so that the step-by-step information is available to users, but please note that these actions should generally be carried out whilst using the Doctor.

To access the Doctor, click here

Solution ID: 7610

Step 1

The Wireless Motion Sensor has been assigned to 2 or more zones. This will stop the Wireless Motion Sensor working properly and may mean rooms heat unexpectedly or do not heat up at all.


Step 2

Select the Wireless Motion Sensor which has been assigned incorrectly.

The Doctor will ask you to select the relevant device


Step 3

The Wireless Motion Sensor channel is assigned to the following rooms. Please select the one room you wish to control with this channel.

The Doctor will ask you to select a zone


Step 4

The Genius Hub will now unassign the Wireless Motion Sensor channel from all zones.

The Doctor will remove the device from the zone


Step 5

The Genius Hub will now assign the Wireless Motion Sensor channel to the correct zone.

The Doctor will now assign the device to a zone